azure.cdn.FrontdoorRule

Conditions FrontdoorRuleConditions

The resource ID of the Front Door Rule Set for this Front Door Rule. Changing this forces a new Front Door Rule to be created.

Order int

The order in which the rules will be applied for the Front Door Endpoint. The order value should be sequential and begin at 1(e.g. 1, 2, 3...). A Front Door Rule with a lesser order value will be applied before a rule with a greater order value.

->NOTE: If the Front Door Rule has an order value of 0 they do not require any conditions and the actions will always be applied.

BehaviorOnMatch string

If this rule is a match should the rules engine continue processing the remaining rules or stop? Possible values are Continue and Stop. Defaults to Continue.

A conditions block as defined below.

Name string

The name which should be used for this Front Door Rule. Possible values must be between 1 and 260 characters in length, begin with a letter and may contain only letters and numbers. Changing this forces a new Front Door Rule to be created.

Actions FrontdoorRuleActionsArgs

An actions block as defined below.

Conditions FrontdoorRuleConditionsArgs

The resource ID of the Front Door Rule Set for this Front Door Rule. Changing this forces a new Front Door Rule to be created.

Order int

->NOTE: If the Front Door Rule has an order value of 0 they do not require any conditions and the actions will always be applied.

BehaviorOnMatch string

If this rule is a match should the rules engine continue processing the remaining rules or stop? Possible values are Continue and Stop. Defaults to Continue.

A conditions block as defined below.

Name string

An actions block as defined below.

The resource ID of the Front Door Rule Set for this Front Door Rule. Changing this forces a new Front Door Rule to be created.

order Integer

->NOTE: If the Front Door Rule has an order value of 0 they do not require any conditions and the actions will always be applied.

behaviorOnMatch String

If this rule is a match should the rules engine continue processing the remaining rules or stop? Possible values are Continue and Stop. Defaults to Continue.

A conditions block as defined below.

name String

An actions block as defined below.

cdnFrontdoorRuleSetId string

The resource ID of the Front Door Rule Set for this Front Door Rule. Changing this forces a new Front Door Rule to be created.

order number

->NOTE: If the Front Door Rule has an order value of 0 they do not require any conditions and the actions will always be applied.

behaviorOnMatch string

If this rule is a match should the rules engine continue processing the remaining rules or stop? Possible values are Continue and Stop. Defaults to Continue.

actions FrontdoorRuleActionsArgs

A conditions block as defined below.

name string

An actions block as defined below.

cdn_frontdoor_rule_set_id str

The resource ID of the Front Door Rule Set for this Front Door Rule. Changing this forces a new Front Door Rule to be created.

order int

->NOTE: If the Front Door Rule has an order value of 0 they do not require any conditions and the actions will always be applied.

behavior_on_match str

If this rule is a match should the rules engine continue processing the remaining rules or stop? Possible values are Continue and Stop. Defaults to Continue.

conditions FrontdoorRuleConditionsArgs

A conditions block as defined below.

name str

actions Property Map

An actions block as defined below.

conditions Property Map

The resource ID of the Front Door Rule Set for this Front Door Rule. Changing this forces a new Front Door Rule to be created.

order Number

->NOTE: If the Front Door Rule has an order value of 0 they do not require any conditions and the actions will always be applied.

behaviorOnMatch String

If this rule is a match should the rules engine continue processing the remaining rules or stop? Possible values are Continue and Stop. Defaults to Continue.

A conditions block as defined below.

name String

Outputs

All input properties are implicitly available as output properties. Additionally, the FrontdoorRule resource produces the following output properties:

CdnFrontdoorRuleSetName string: The name of the Front Door Rule Set containing this Front Door Rule.
Id string: The provider-assigned unique ID for this managed resource.

CdnFrontdoorRuleSetName string: The name of the Front Door Rule Set containing this Front Door Rule.
Id string: The provider-assigned unique ID for this managed resource.

cdnFrontdoorRuleSetName String: The name of the Front Door Rule Set containing this Front Door Rule.
id String: The provider-assigned unique ID for this managed resource.

cdnFrontdoorRuleSetName string: The name of the Front Door Rule Set containing this Front Door Rule.
id string: The provider-assigned unique ID for this managed resource.

cdn_frontdoor_rule_set_name str: The name of the Front Door Rule Set containing this Front Door Rule.
id str: The provider-assigned unique ID for this managed resource.

cdnFrontdoorRuleSetName String: The name of the Front Door Rule Set containing this Front Door Rule.
id String: The provider-assigned unique ID for this managed resource.

Look up Existing FrontdoorRule Resource

Get an existing FrontdoorRule resource’s state with the given name, ID, and optional extra properties used to qualify the lookup.

TypeScript
Python
Go
C#
Java
YAML

public static get(name: string, id: Input<ID>, state?: FrontdoorRuleState, opts?: CustomResourceOptions): FrontdoorRule

@staticmethod
def get(resource_name: str,
        id: str,
        opts: Optional[ResourceOptions] = None,
        actions: Optional[FrontdoorRuleActionsArgs] = None,
        behavior_on_match: Optional[str] = None,
        cdn_frontdoor_rule_set_id: Optional[str] = None,
        cdn_frontdoor_rule_set_name: Optional[str] = None,
        conditions: Optional[FrontdoorRuleConditionsArgs] = None,
        name: Optional[str] = None,
        order: Optional[int] = None) -> FrontdoorRule

func GetFrontdoorRule(ctx *Context, name string, id IDInput, state *FrontdoorRuleState, opts ...ResourceOption) (*FrontdoorRule, error)

public static FrontdoorRule Get(string name, Input<string> id, FrontdoorRuleState? state, CustomResourceOptions? opts = null)

public static FrontdoorRule get(String name, Output<String> id, FrontdoorRuleState state, CustomResourceOptions options)

resources:  _:    type: azure:cdn:FrontdoorRule    get:      id: ${id}

name: The unique name of the resulting resource.
id: The unique provider ID of the resource to lookup.
state: Any extra arguments used during the lookup.
opts: A bag of options that control this resource's behavior.

resource_name: The unique name of the resulting resource.
id: The unique provider ID of the resource to lookup.

name: The unique name of the resulting resource.
id: The unique provider ID of the resource to lookup.
state: Any extra arguments used during the lookup.
opts: A bag of options that control this resource's behavior.

name: The unique name of the resulting resource.
id: The unique provider ID of the resource to lookup.
state: Any extra arguments used during the lookup.
opts: A bag of options that control this resource's behavior.

name: The unique name of the resulting resource.
id: The unique provider ID of the resource to lookup.
state: Any extra arguments used during the lookup.
opts: A bag of options that control this resource's behavior.

The following state arguments are supported:

Actions FrontdoorRuleActions

An actions block as defined below.

BehaviorOnMatch string

If this rule is a match should the rules engine continue processing the remaining rules or stop? Possible values are Continue and Stop. Defaults to Continue.

Conditions FrontdoorRuleConditions

The resource ID of the Front Door Rule Set for this Front Door Rule. Changing this forces a new Front Door Rule to be created.

CdnFrontdoorRuleSetName string

The name of the Front Door Rule Set containing this Front Door Rule.

A conditions block as defined below.

Name string

Order int

->NOTE: If the Front Door Rule has an order value of 0 they do not require any conditions and the actions will always be applied.

Actions FrontdoorRuleActionsArgs

An actions block as defined below.

BehaviorOnMatch string

If this rule is a match should the rules engine continue processing the remaining rules or stop? Possible values are Continue and Stop. Defaults to Continue.

Conditions FrontdoorRuleConditionsArgs

The resource ID of the Front Door Rule Set for this Front Door Rule. Changing this forces a new Front Door Rule to be created.

CdnFrontdoorRuleSetName string

The name of the Front Door Rule Set containing this Front Door Rule.

A conditions block as defined below.

Name string

Order int

->NOTE: If the Front Door Rule has an order value of 0 they do not require any conditions and the actions will always be applied.

An actions block as defined below.

behaviorOnMatch String

If this rule is a match should the rules engine continue processing the remaining rules or stop? Possible values are Continue and Stop. Defaults to Continue.

The resource ID of the Front Door Rule Set for this Front Door Rule. Changing this forces a new Front Door Rule to be created.

cdnFrontdoorRuleSetName String

The name of the Front Door Rule Set containing this Front Door Rule.

A conditions block as defined below.

name String

order Integer

->NOTE: If the Front Door Rule has an order value of 0 they do not require any conditions and the actions will always be applied.

An actions block as defined below.

behaviorOnMatch string

If this rule is a match should the rules engine continue processing the remaining rules or stop? Possible values are Continue and Stop. Defaults to Continue.

cdnFrontdoorRuleSetId string

The resource ID of the Front Door Rule Set for this Front Door Rule. Changing this forces a new Front Door Rule to be created.

cdnFrontdoorRuleSetName string

The name of the Front Door Rule Set containing this Front Door Rule.

actions FrontdoorRuleActionsArgs

A conditions block as defined below.

name string

order number

->NOTE: If the Front Door Rule has an order value of 0 they do not require any conditions and the actions will always be applied.

An actions block as defined below.

behavior_on_match str

If this rule is a match should the rules engine continue processing the remaining rules or stop? Possible values are Continue and Stop. Defaults to Continue.

cdn_frontdoor_rule_set_id str

The resource ID of the Front Door Rule Set for this Front Door Rule. Changing this forces a new Front Door Rule to be created.

cdn_frontdoor_rule_set_name str

The name of the Front Door Rule Set containing this Front Door Rule.

conditions FrontdoorRuleConditionsArgs

A conditions block as defined below.

name str

order int

->NOTE: If the Front Door Rule has an order value of 0 they do not require any conditions and the actions will always be applied.

actions Property Map

An actions block as defined below.

behaviorOnMatch String

If this rule is a match should the rules engine continue processing the remaining rules or stop? Possible values are Continue and Stop. Defaults to Continue.

conditions Property Map

The resource ID of the Front Door Rule Set for this Front Door Rule. Changing this forces a new Front Door Rule to be created.

cdnFrontdoorRuleSetName String

The name of the Front Door Rule Set containing this Front Door Rule.

A conditions block as defined below.

name String

order Number

->NOTE: If the Front Door Rule has an order value of 0 they do not require any conditions and the actions will always be applied.

Supporting Types

FrontdoorRuleActions
, FrontdoorRuleActionsArgs

RequestHeaderActions List<FrontdoorRuleActionsRequestHeaderAction>: A request_header_action block as defined below.
ResponseHeaderActions List<FrontdoorRuleActionsResponseHeaderAction>: A response_header_action block as defined below.
RouteConfigurationOverrideAction FrontdoorRuleActionsRouteConfigurationOverrideAction: A route_configuration_override_action block as defined below.
UrlRedirectAction FrontdoorRuleActionsUrlRedirectAction: A url_redirect_action block as defined below. You may not have a url_redirect_action and a url_rewrite_action defined in the same actions block.
UrlRewriteAction FrontdoorRuleActionsUrlRewriteAction: A url_rewrite_action block as defined below. You may not have a url_rewrite_action and a url_redirect_action defined in the same actions block.

RequestHeaderActions []FrontdoorRuleActionsRequestHeaderAction: A request_header_action block as defined below.
ResponseHeaderActions []FrontdoorRuleActionsResponseHeaderAction: A response_header_action block as defined below.
RouteConfigurationOverrideAction FrontdoorRuleActionsRouteConfigurationOverrideAction: A route_configuration_override_action block as defined below.
UrlRedirectAction FrontdoorRuleActionsUrlRedirectAction: A url_redirect_action block as defined below. You may not have a url_redirect_action and a url_rewrite_action defined in the same actions block.
UrlRewriteAction FrontdoorRuleActionsUrlRewriteAction: A url_rewrite_action block as defined below. You may not have a url_rewrite_action and a url_redirect_action defined in the same actions block.

requestHeaderActions List<FrontdoorRuleActionsRequestHeaderAction>: A request_header_action block as defined below.
responseHeaderActions List<FrontdoorRuleActionsResponseHeaderAction>: A response_header_action block as defined below.
routeConfigurationOverrideAction FrontdoorRuleActionsRouteConfigurationOverrideAction: A route_configuration_override_action block as defined below.
urlRedirectAction FrontdoorRuleActionsUrlRedirectAction: A url_redirect_action block as defined below. You may not have a url_redirect_action and a url_rewrite_action defined in the same actions block.
urlRewriteAction FrontdoorRuleActionsUrlRewriteAction: A url_rewrite_action block as defined below. You may not have a url_rewrite_action and a url_redirect_action defined in the same actions block.

requestHeaderActions FrontdoorRuleActionsRequestHeaderAction[]: A request_header_action block as defined below.
responseHeaderActions FrontdoorRuleActionsResponseHeaderAction[]: A response_header_action block as defined below.
routeConfigurationOverrideAction FrontdoorRuleActionsRouteConfigurationOverrideAction: A route_configuration_override_action block as defined below.
urlRedirectAction FrontdoorRuleActionsUrlRedirectAction: A url_redirect_action block as defined below. You may not have a url_redirect_action and a url_rewrite_action defined in the same actions block.
urlRewriteAction FrontdoorRuleActionsUrlRewriteAction: A url_rewrite_action block as defined below. You may not have a url_rewrite_action and a url_redirect_action defined in the same actions block.

request_header_actions Sequence[FrontdoorRuleActionsRequestHeaderAction]: A request_header_action block as defined below.
response_header_actions Sequence[FrontdoorRuleActionsResponseHeaderAction]: A response_header_action block as defined below.
route_configuration_override_action FrontdoorRuleActionsRouteConfigurationOverrideAction: A route_configuration_override_action block as defined below.
url_redirect_action FrontdoorRuleActionsUrlRedirectAction: A url_redirect_action block as defined below. You may not have a url_redirect_action and a url_rewrite_action defined in the same actions block.
url_rewrite_action FrontdoorRuleActionsUrlRewriteAction: A url_rewrite_action block as defined below. You may not have a url_rewrite_action and a url_redirect_action defined in the same actions block.

requestHeaderActions List<Property Map>: A request_header_action block as defined below.
responseHeaderActions List<Property Map>: A response_header_action block as defined below.
routeConfigurationOverrideAction Property Map: A route_configuration_override_action block as defined below.
urlRedirectAction Property Map: A url_redirect_action block as defined below. You may not have a url_redirect_action and a url_rewrite_action defined in the same actions block.
urlRewriteAction Property Map: A url_rewrite_action block as defined below. You may not have a url_rewrite_action and a url_redirect_action defined in the same actions block.

FrontdoorRuleActionsRequestHeaderAction
, FrontdoorRuleActionsRequestHeaderActionArgs

HeaderAction string

The action to be taken on the specified header_name. Possible values include Append, Overwrite or Delete.

HeaderName string

The name of the header to modify.

Value string

The value to append or overwrite.

->NOTE: value is required if the header_action is set to Append or Overwrite.

HeaderAction string

The action to be taken on the specified header_name. Possible values include Append, Overwrite or Delete.

HeaderName string

The name of the header to modify.

Value string

The value to append or overwrite.

->NOTE: value is required if the header_action is set to Append or Overwrite.

headerAction String

The action to be taken on the specified header_name. Possible values include Append, Overwrite or Delete.

headerName String

The name of the header to modify.

value String

The value to append or overwrite.

->NOTE: value is required if the header_action is set to Append or Overwrite.

headerAction string

The action to be taken on the specified header_name. Possible values include Append, Overwrite or Delete.

headerName string

The name of the header to modify.

value string

The value to append or overwrite.

->NOTE: value is required if the header_action is set to Append or Overwrite.

header_action str

The action to be taken on the specified header_name. Possible values include Append, Overwrite or Delete.

header_name str

The name of the header to modify.

value str

The value to append or overwrite.

->NOTE: value is required if the header_action is set to Append or Overwrite.

headerAction String

The action to be taken on the specified header_name. Possible values include Append, Overwrite or Delete.

headerName String

The name of the header to modify.

value String

The value to append or overwrite.

->NOTE: value is required if the header_action is set to Append or Overwrite.

FrontdoorRuleActionsResponseHeaderAction
, FrontdoorRuleActionsResponseHeaderActionArgs

HeaderAction string

The action to be taken on the specified header_name. Possible values include Append, Overwrite or Delete.

HeaderName string

The name of the header to modify.

Value string

The value to append or overwrite.

->NOTE: value is required if the header_action is set to Append or Overwrite.

HeaderAction string

The action to be taken on the specified header_name. Possible values include Append, Overwrite or Delete.

HeaderName string

The name of the header to modify.

Value string

The value to append or overwrite.

->NOTE: value is required if the header_action is set to Append or Overwrite.

headerAction String

The action to be taken on the specified header_name. Possible values include Append, Overwrite or Delete.

headerName String

The name of the header to modify.

value String

The value to append or overwrite.

->NOTE: value is required if the header_action is set to Append or Overwrite.

headerAction string

The action to be taken on the specified header_name. Possible values include Append, Overwrite or Delete.

headerName string

The name of the header to modify.

value string

The value to append or overwrite.

->NOTE: value is required if the header_action is set to Append or Overwrite.

header_action str

The action to be taken on the specified header_name. Possible values include Append, Overwrite or Delete.

header_name str

The name of the header to modify.

value str

The value to append or overwrite.

->NOTE: value is required if the header_action is set to Append or Overwrite.

headerAction String

The action to be taken on the specified header_name. Possible values include Append, Overwrite or Delete.

headerName String

The name of the header to modify.

value String

The value to append or overwrite.

->NOTE: value is required if the header_action is set to Append or Overwrite.

FrontdoorRuleActionsRouteConfigurationOverrideAction
, FrontdoorRuleActionsRouteConfigurationOverrideActionArgs

CacheBehavior string

HonorOrigin the Front Door will always honor origin response header directive. If the origin directive is missing, Front Door will cache contents anywhere from 1 to 3 days. OverrideAlways the TTL value returned from your Front Door Origin is overwritten with the value specified in the action. This behavior will only be applied if the response is cacheable. OverrideIfOriginMissing if no TTL value gets returned from your Front Door Origin, the rule sets the TTL to the value specified in the action. This behavior will only be applied if the response is cacheable. Disabled the Front Door will not cache the response contents, irrespective of Front Door Origin response directives. Possible values include HonorOrigin, OverrideAlways, OverrideIfOriginMissing or Disabled.

CacheDuration string

When Cache behavior is set to Override or SetIfMissing, this field specifies the cache duration to use. The maximum duration is 366 days specified in the d.HH:MM:SS format(e.g. 365.23:59:59). If the desired maximum cache duration is less than 1 day then the maximum cache duration should be specified in the HH:MM:SS format(e.g. 23:59:59).

CdnFrontdoorOriginGroupId string

The Front Door Origin Group resource ID that the request should be routed to. This overrides the configuration specified in the Front Door Endpoint route.

CompressionEnabled bool

Should the Front Door dynamically compress the content? Possible values include true or false.

->NOTE: Content won't be compressed on AzureFrontDoor when requested content is smaller than 1 byte or larger than 1 MB.

ForwardingProtocol string

The forwarding protocol the request will be redirected as. This overrides the configuration specified in the route to be associated with. Possible values include MatchRequest, HttpOnly or HttpsOnly.

->NOTE: If the cdn_frontdoor_origin_group_id is not defined you cannot set the forwarding_protocol.

QueryStringCachingBehavior string

IncludeSpecifiedQueryStrings query strings specified in the query_string_parameters field get included when the cache key gets generated. UseQueryString cache every unique URL, each unique URL will have its own cache key. IgnoreSpecifiedQueryStrings query strings specified in the query_string_parameters field get excluded when the cache key gets generated. IgnoreQueryString query strings aren't considered when the cache key gets generated. Possible values include IgnoreQueryString, UseQueryString, IgnoreSpecifiedQueryStrings or IncludeSpecifiedQueryStrings.

QueryStringParameters List<string>

A list of query string parameter names.

->NOTE: query_string_parameters is a required field when the query_string_caching_behavior is set to IncludeSpecifiedQueryStrings or IgnoreSpecifiedQueryStrings.

CacheBehavior string

CacheDuration string

CdnFrontdoorOriginGroupId string

The Front Door Origin Group resource ID that the request should be routed to. This overrides the configuration specified in the Front Door Endpoint route.

CompressionEnabled bool

Should the Front Door dynamically compress the content? Possible values include true or false.

->NOTE: Content won't be compressed on AzureFrontDoor when requested content is smaller than 1 byte or larger than 1 MB.

ForwardingProtocol string

->NOTE: If the cdn_frontdoor_origin_group_id is not defined you cannot set the forwarding_protocol.

QueryStringCachingBehavior string

QueryStringParameters []string

A list of query string parameter names.

->NOTE: query_string_parameters is a required field when the query_string_caching_behavior is set to IncludeSpecifiedQueryStrings or IgnoreSpecifiedQueryStrings.

cacheBehavior String

cacheDuration String

cdnFrontdoorOriginGroupId String

The Front Door Origin Group resource ID that the request should be routed to. This overrides the configuration specified in the Front Door Endpoint route.

compressionEnabled Boolean

Should the Front Door dynamically compress the content? Possible values include true or false.

->NOTE: Content won't be compressed on AzureFrontDoor when requested content is smaller than 1 byte or larger than 1 MB.

forwardingProtocol String

->NOTE: If the cdn_frontdoor_origin_group_id is not defined you cannot set the forwarding_protocol.

queryStringCachingBehavior String

queryStringParameters List<String>

A list of query string parameter names.

->NOTE: query_string_parameters is a required field when the query_string_caching_behavior is set to IncludeSpecifiedQueryStrings or IgnoreSpecifiedQueryStrings.

cacheBehavior string

cacheDuration string

cdnFrontdoorOriginGroupId string

The Front Door Origin Group resource ID that the request should be routed to. This overrides the configuration specified in the Front Door Endpoint route.

compressionEnabled boolean

Should the Front Door dynamically compress the content? Possible values include true or false.

->NOTE: Content won't be compressed on AzureFrontDoor when requested content is smaller than 1 byte or larger than 1 MB.

forwardingProtocol string

->NOTE: If the cdn_frontdoor_origin_group_id is not defined you cannot set the forwarding_protocol.

queryStringCachingBehavior string

queryStringParameters string[]

A list of query string parameter names.

->NOTE: query_string_parameters is a required field when the query_string_caching_behavior is set to IncludeSpecifiedQueryStrings or IgnoreSpecifiedQueryStrings.

cache_behavior str

cache_duration str

cdn_frontdoor_origin_group_id str

The Front Door Origin Group resource ID that the request should be routed to. This overrides the configuration specified in the Front Door Endpoint route.

compression_enabled bool

Should the Front Door dynamically compress the content? Possible values include true or false.

->NOTE: Content won't be compressed on AzureFrontDoor when requested content is smaller than 1 byte or larger than 1 MB.

forwarding_protocol str

->NOTE: If the cdn_frontdoor_origin_group_id is not defined you cannot set the forwarding_protocol.

query_string_caching_behavior str

query_string_parameters Sequence[str]

A list of query string parameter names.

->NOTE: query_string_parameters is a required field when the query_string_caching_behavior is set to IncludeSpecifiedQueryStrings or IgnoreSpecifiedQueryStrings.

cacheBehavior String

cacheDuration String

cdnFrontdoorOriginGroupId String

The Front Door Origin Group resource ID that the request should be routed to. This overrides the configuration specified in the Front Door Endpoint route.

compressionEnabled Boolean

Should the Front Door dynamically compress the content? Possible values include true or false.

->NOTE: Content won't be compressed on AzureFrontDoor when requested content is smaller than 1 byte or larger than 1 MB.

forwardingProtocol String

->NOTE: If the cdn_frontdoor_origin_group_id is not defined you cannot set the forwarding_protocol.

queryStringCachingBehavior String

queryStringParameters List<String>

A list of query string parameter names.

->NOTE: query_string_parameters is a required field when the query_string_caching_behavior is set to IncludeSpecifiedQueryStrings or IgnoreSpecifiedQueryStrings.

FrontdoorRuleActionsUrlRedirectAction
, FrontdoorRuleActionsUrlRedirectActionArgs

DestinationHostname string: The host name you want the request to be redirected to. The value must be a string between 0 and 2048 characters in length, leave blank to preserve the incoming host.
RedirectType string: The response type to return to the requestor. Possible values include Moved, Found , TemporaryRedirect or PermanentRedirect.
DestinationFragment string: The fragment to use in the redirect. The value must be a string between 0 and 1024 characters in length, leave blank to preserve the incoming fragment. Defaults to "".
DestinationPath string: The path to use in the redirect. The value must be a string and include the leading /, leave blank to preserve the incoming path. Defaults to "".
QueryString string: The query string used in the redirect URL. The value must be in the <key>=<value> or <key>={action_server_variable} format and must not include the leading ?, leave blank to preserve the incoming query string. Maximum allowed length for this field is 2048 characters. Defaults to "".
RedirectProtocol string: The protocol the request will be redirected as. Possible values include MatchRequest, Http or Https. Defaults to MatchRequest.

DestinationHostname string: The host name you want the request to be redirected to. The value must be a string between 0 and 2048 characters in length, leave blank to preserve the incoming host.
RedirectType string: The response type to return to the requestor. Possible values include Moved, Found , TemporaryRedirect or PermanentRedirect.
DestinationFragment string: The fragment to use in the redirect. The value must be a string between 0 and 1024 characters in length, leave blank to preserve the incoming fragment. Defaults to "".
DestinationPath string: The path to use in the redirect. The value must be a string and include the leading /, leave blank to preserve the incoming path. Defaults to "".
QueryString string: The query string used in the redirect URL. The value must be in the <key>=<value> or <key>={action_server_variable} format and must not include the leading ?, leave blank to preserve the incoming query string. Maximum allowed length for this field is 2048 characters. Defaults to "".
RedirectProtocol string: The protocol the request will be redirected as. Possible values include MatchRequest, Http or Https. Defaults to MatchRequest.

destinationHostname String: The host name you want the request to be redirected to. The value must be a string between 0 and 2048 characters in length, leave blank to preserve the incoming host.
redirectType String: The response type to return to the requestor. Possible values include Moved, Found , TemporaryRedirect or PermanentRedirect.
destinationFragment String: The fragment to use in the redirect. The value must be a string between 0 and 1024 characters in length, leave blank to preserve the incoming fragment. Defaults to "".
destinationPath String: The path to use in the redirect. The value must be a string and include the leading /, leave blank to preserve the incoming path. Defaults to "".
queryString String: The query string used in the redirect URL. The value must be in the <key>=<value> or <key>={action_server_variable} format and must not include the leading ?, leave blank to preserve the incoming query string. Maximum allowed length for this field is 2048 characters. Defaults to "".
redirectProtocol String: The protocol the request will be redirected as. Possible values include MatchRequest, Http or Https. Defaults to MatchRequest.

destinationHostname string: The host name you want the request to be redirected to. The value must be a string between 0 and 2048 characters in length, leave blank to preserve the incoming host.
redirectType string: The response type to return to the requestor. Possible values include Moved, Found , TemporaryRedirect or PermanentRedirect.
destinationFragment string: The fragment to use in the redirect. The value must be a string between 0 and 1024 characters in length, leave blank to preserve the incoming fragment. Defaults to "".
destinationPath string: The path to use in the redirect. The value must be a string and include the leading /, leave blank to preserve the incoming path. Defaults to "".
queryString string: The query string used in the redirect URL. The value must be in the <key>=<value> or <key>={action_server_variable} format and must not include the leading ?, leave blank to preserve the incoming query string. Maximum allowed length for this field is 2048 characters. Defaults to "".
redirectProtocol string: The protocol the request will be redirected as. Possible values include MatchRequest, Http or Https. Defaults to MatchRequest.

destination_hostname str: The host name you want the request to be redirected to. The value must be a string between 0 and 2048 characters in length, leave blank to preserve the incoming host.
redirect_type str: The response type to return to the requestor. Possible values include Moved, Found , TemporaryRedirect or PermanentRedirect.
destination_fragment str: The fragment to use in the redirect. The value must be a string between 0 and 1024 characters in length, leave blank to preserve the incoming fragment. Defaults to "".
destination_path str: The path to use in the redirect. The value must be a string and include the leading /, leave blank to preserve the incoming path. Defaults to "".
query_string str: The query string used in the redirect URL. The value must be in the <key>=<value> or <key>={action_server_variable} format and must not include the leading ?, leave blank to preserve the incoming query string. Maximum allowed length for this field is 2048 characters. Defaults to "".
redirect_protocol str: The protocol the request will be redirected as. Possible values include MatchRequest, Http or Https. Defaults to MatchRequest.

destinationHostname String: The host name you want the request to be redirected to. The value must be a string between 0 and 2048 characters in length, leave blank to preserve the incoming host.
redirectType String: The response type to return to the requestor. Possible values include Moved, Found , TemporaryRedirect or PermanentRedirect.
destinationFragment String: The fragment to use in the redirect. The value must be a string between 0 and 1024 characters in length, leave blank to preserve the incoming fragment. Defaults to "".
destinationPath String: The path to use in the redirect. The value must be a string and include the leading /, leave blank to preserve the incoming path. Defaults to "".
queryString String: The query string used in the redirect URL. The value must be in the <key>=<value> or <key>={action_server_variable} format and must not include the leading ?, leave blank to preserve the incoming query string. Maximum allowed length for this field is 2048 characters. Defaults to "".
redirectProtocol String: The protocol the request will be redirected as. Possible values include MatchRequest, Http or Https. Defaults to MatchRequest.

FrontdoorRuleActionsUrlRewriteAction
, FrontdoorRuleActionsUrlRewriteActionArgs

Destination string: The destination path to use in the rewrite. The destination path overwrites the source pattern.
SourcePattern string: The source pattern in the URL path to replace. This uses prefix-based matching. For example, to match all URL paths use a forward slash "/" as the source pattern value.
PreserveUnmatchedPath bool: Append the remaining path after the source pattern to the new destination path? Possible values true or false. Defaults to false.

Destination string: The destination path to use in the rewrite. The destination path overwrites the source pattern.
SourcePattern string: The source pattern in the URL path to replace. This uses prefix-based matching. For example, to match all URL paths use a forward slash "/" as the source pattern value.
PreserveUnmatchedPath bool: Append the remaining path after the source pattern to the new destination path? Possible values true or false. Defaults to false.

destination String: The destination path to use in the rewrite. The destination path overwrites the source pattern.
sourcePattern String: The source pattern in the URL path to replace. This uses prefix-based matching. For example, to match all URL paths use a forward slash "/" as the source pattern value.
preserveUnmatchedPath Boolean: Append the remaining path after the source pattern to the new destination path? Possible values true or false. Defaults to false.

destination string: The destination path to use in the rewrite. The destination path overwrites the source pattern.
sourcePattern string: The source pattern in the URL path to replace. This uses prefix-based matching. For example, to match all URL paths use a forward slash "/" as the source pattern value.
preserveUnmatchedPath boolean: Append the remaining path after the source pattern to the new destination path? Possible values true or false. Defaults to false.

destination str: The destination path to use in the rewrite. The destination path overwrites the source pattern.
source_pattern str: The source pattern in the URL path to replace. This uses prefix-based matching. For example, to match all URL paths use a forward slash "/" as the source pattern value.
preserve_unmatched_path bool: Append the remaining path after the source pattern to the new destination path? Possible values true or false. Defaults to false.

destination String: The destination path to use in the rewrite. The destination path overwrites the source pattern.
sourcePattern String: The source pattern in the URL path to replace. This uses prefix-based matching. For example, to match all URL paths use a forward slash "/" as the source pattern value.
preserveUnmatchedPath Boolean: Append the remaining path after the source pattern to the new destination path? Possible values true or false. Defaults to false.

FrontdoorRuleConditions
, FrontdoorRuleConditionsArgs

ClientPortConditions List<FrontdoorRuleConditionsClientPortCondition>: A client_port_condition block as defined below.
CookiesConditions List<FrontdoorRuleConditionsCookiesCondition>: A cookies_condition block as defined below.
HostNameConditions List<FrontdoorRuleConditionsHostNameCondition>: A host_name_condition block as defined below.
HttpVersionConditions List<FrontdoorRuleConditionsHttpVersionCondition>: A http_version_condition block as defined below.
IsDeviceConditions List<FrontdoorRuleConditionsIsDeviceCondition>: A is_device_condition block as defined below.
PostArgsConditions List<FrontdoorRuleConditionsPostArgsCondition>: A post_args_condition block as defined below.
QueryStringConditions List<FrontdoorRuleConditionsQueryStringCondition>: A query_string_condition block as defined below.
RemoteAddressConditions List<FrontdoorRuleConditionsRemoteAddressCondition>: A remote_address_condition block as defined below.
RequestBodyConditions List<FrontdoorRuleConditionsRequestBodyCondition>: A request_body_condition block as defined below.
RequestHeaderConditions List<FrontdoorRuleConditionsRequestHeaderCondition>: A request_header_condition block as defined below.
RequestMethodConditions List<FrontdoorRuleConditionsRequestMethodCondition>: A request_method_condition block as defined below.
RequestSchemeConditions List<FrontdoorRuleConditionsRequestSchemeCondition>: A request_scheme_condition block as defined below.
RequestUriConditions List<FrontdoorRuleConditionsRequestUriCondition>: A request_uri_condition block as defined below.
ServerPortConditions List<FrontdoorRuleConditionsServerPortCondition>: A server_port_condition block as defined below.
SocketAddressConditions List<FrontdoorRuleConditionsSocketAddressCondition>: A socket_address_condition block as defined below.
SslProtocolConditions List<FrontdoorRuleConditionsSslProtocolCondition>: A ssl_protocol_condition block as defined below.
UrlFileExtensionConditions List<FrontdoorRuleConditionsUrlFileExtensionCondition>: A url_file_extension_condition block as defined below.
UrlFilenameConditions List<FrontdoorRuleConditionsUrlFilenameCondition>: A url_filename_condition block as defined below.
UrlPathConditions List<FrontdoorRuleConditionsUrlPathCondition>: A url_path_condition block as defined below.

ClientPortConditions []FrontdoorRuleConditionsClientPortCondition: A client_port_condition block as defined below.
CookiesConditions []FrontdoorRuleConditionsCookiesCondition: A cookies_condition block as defined below.
HostNameConditions []FrontdoorRuleConditionsHostNameCondition: A host_name_condition block as defined below.
HttpVersionConditions []FrontdoorRuleConditionsHttpVersionCondition: A http_version_condition block as defined below.
IsDeviceConditions []FrontdoorRuleConditionsIsDeviceCondition: A is_device_condition block as defined below.
PostArgsConditions []FrontdoorRuleConditionsPostArgsCondition: A post_args_condition block as defined below.
QueryStringConditions []FrontdoorRuleConditionsQueryStringCondition: A query_string_condition block as defined below.
RemoteAddressConditions []FrontdoorRuleConditionsRemoteAddressCondition: A remote_address_condition block as defined below.
RequestBodyConditions []FrontdoorRuleConditionsRequestBodyCondition: A request_body_condition block as defined below.
RequestHeaderConditions []FrontdoorRuleConditionsRequestHeaderCondition: A request_header_condition block as defined below.
RequestMethodConditions []FrontdoorRuleConditionsRequestMethodCondition: A request_method_condition block as defined below.
RequestSchemeConditions []FrontdoorRuleConditionsRequestSchemeCondition: A request_scheme_condition block as defined below.
RequestUriConditions []FrontdoorRuleConditionsRequestUriCondition: A request_uri_condition block as defined below.
ServerPortConditions []FrontdoorRuleConditionsServerPortCondition: A server_port_condition block as defined below.
SocketAddressConditions []FrontdoorRuleConditionsSocketAddressCondition: A socket_address_condition block as defined below.
SslProtocolConditions []FrontdoorRuleConditionsSslProtocolCondition: A ssl_protocol_condition block as defined below.
UrlFileExtensionConditions []FrontdoorRuleConditionsUrlFileExtensionCondition: A url_file_extension_condition block as defined below.
UrlFilenameConditions []FrontdoorRuleConditionsUrlFilenameCondition: A url_filename_condition block as defined below.
UrlPathConditions []FrontdoorRuleConditionsUrlPathCondition: A url_path_condition block as defined below.

clientPortConditions List<FrontdoorRuleConditionsClientPortCondition>: A client_port_condition block as defined below.
cookiesConditions List<FrontdoorRuleConditionsCookiesCondition>: A cookies_condition block as defined below.
hostNameConditions List<FrontdoorRuleConditionsHostNameCondition>: A host_name_condition block as defined below.
httpVersionConditions List<FrontdoorRuleConditionsHttpVersionCondition>: A http_version_condition block as defined below.
isDeviceConditions List<FrontdoorRuleConditionsIsDeviceCondition>: A is_device_condition block as defined below.
postArgsConditions List<FrontdoorRuleConditionsPostArgsCondition>: A post_args_condition block as defined below.
queryStringConditions List<FrontdoorRuleConditionsQueryStringCondition>: A query_string_condition block as defined below.
remoteAddressConditions List<FrontdoorRuleConditionsRemoteAddressCondition>: A remote_address_condition block as defined below.
requestBodyConditions List<FrontdoorRuleConditionsRequestBodyCondition>: A request_body_condition block as defined below.
requestHeaderConditions List<FrontdoorRuleConditionsRequestHeaderCondition>: A request_header_condition block as defined below.
requestMethodConditions List<FrontdoorRuleConditionsRequestMethodCondition>: A request_method_condition block as defined below.
requestSchemeConditions List<FrontdoorRuleConditionsRequestSchemeCondition>: A request_scheme_condition block as defined below.
requestUriConditions List<FrontdoorRuleConditionsRequestUriCondition>: A request_uri_condition block as defined below.
serverPortConditions List<FrontdoorRuleConditionsServerPortCondition>: A server_port_condition block as defined below.
socketAddressConditions List<FrontdoorRuleConditionsSocketAddressCondition>: A socket_address_condition block as defined below.
sslProtocolConditions List<FrontdoorRuleConditionsSslProtocolCondition>: A ssl_protocol_condition block as defined below.
urlFileExtensionConditions List<FrontdoorRuleConditionsUrlFileExtensionCondition>: A url_file_extension_condition block as defined below.
urlFilenameConditions List<FrontdoorRuleConditionsUrlFilenameCondition>: A url_filename_condition block as defined below.
urlPathConditions List<FrontdoorRuleConditionsUrlPathCondition>: A url_path_condition block as defined below.

clientPortConditions FrontdoorRuleConditionsClientPortCondition[]: A client_port_condition block as defined below.
cookiesConditions FrontdoorRuleConditionsCookiesCondition[]: A cookies_condition block as defined below.
hostNameConditions FrontdoorRuleConditionsHostNameCondition[]: A host_name_condition block as defined below.
httpVersionConditions FrontdoorRuleConditionsHttpVersionCondition[]: A http_version_condition block as defined below.
isDeviceConditions FrontdoorRuleConditionsIsDeviceCondition[]: A is_device_condition block as defined below.
postArgsConditions FrontdoorRuleConditionsPostArgsCondition[]: A post_args_condition block as defined below.
queryStringConditions FrontdoorRuleConditionsQueryStringCondition[]: A query_string_condition block as defined below.
remoteAddressConditions FrontdoorRuleConditionsRemoteAddressCondition[]: A remote_address_condition block as defined below.
requestBodyConditions FrontdoorRuleConditionsRequestBodyCondition[]: A request_body_condition block as defined below.
requestHeaderConditions FrontdoorRuleConditionsRequestHeaderCondition[]: A request_header_condition block as defined below.
requestMethodConditions FrontdoorRuleConditionsRequestMethodCondition[]: A request_method_condition block as defined below.
requestSchemeConditions FrontdoorRuleConditionsRequestSchemeCondition[]: A request_scheme_condition block as defined below.
requestUriConditions FrontdoorRuleConditionsRequestUriCondition[]: A request_uri_condition block as defined below.
serverPortConditions FrontdoorRuleConditionsServerPortCondition[]: A server_port_condition block as defined below.
socketAddressConditions FrontdoorRuleConditionsSocketAddressCondition[]: A socket_address_condition block as defined below.
sslProtocolConditions FrontdoorRuleConditionsSslProtocolCondition[]: A ssl_protocol_condition block as defined below.
urlFileExtensionConditions FrontdoorRuleConditionsUrlFileExtensionCondition[]: A url_file_extension_condition block as defined below.
urlFilenameConditions FrontdoorRuleConditionsUrlFilenameCondition[]: A url_filename_condition block as defined below.
urlPathConditions FrontdoorRuleConditionsUrlPathCondition[]: A url_path_condition block as defined below.

client_port_conditions Sequence[FrontdoorRuleConditionsClientPortCondition]: A client_port_condition block as defined below.
cookies_conditions Sequence[FrontdoorRuleConditionsCookiesCondition]: A cookies_condition block as defined below.
host_name_conditions Sequence[FrontdoorRuleConditionsHostNameCondition]: A host_name_condition block as defined below.
http_version_conditions Sequence[FrontdoorRuleConditionsHttpVersionCondition]: A http_version_condition block as defined below.
is_device_conditions Sequence[FrontdoorRuleConditionsIsDeviceCondition]: A is_device_condition block as defined below.
post_args_conditions Sequence[FrontdoorRuleConditionsPostArgsCondition]: A post_args_condition block as defined below.
query_string_conditions Sequence[FrontdoorRuleConditionsQueryStringCondition]: A query_string_condition block as defined below.
remote_address_conditions Sequence[FrontdoorRuleConditionsRemoteAddressCondition]: A remote_address_condition block as defined below.
request_body_conditions Sequence[FrontdoorRuleConditionsRequestBodyCondition]: A request_body_condition block as defined below.
request_header_conditions Sequence[FrontdoorRuleConditionsRequestHeaderCondition]: A request_header_condition block as defined below.
request_method_conditions Sequence[FrontdoorRuleConditionsRequestMethodCondition]: A request_method_condition block as defined below.
request_scheme_conditions Sequence[FrontdoorRuleConditionsRequestSchemeCondition]: A request_scheme_condition block as defined below.
request_uri_conditions Sequence[FrontdoorRuleConditionsRequestUriCondition]: A request_uri_condition block as defined below.
server_port_conditions Sequence[FrontdoorRuleConditionsServerPortCondition]: A server_port_condition block as defined below.
socket_address_conditions Sequence[FrontdoorRuleConditionsSocketAddressCondition]: A socket_address_condition block as defined below.
ssl_protocol_conditions Sequence[FrontdoorRuleConditionsSslProtocolCondition]: A ssl_protocol_condition block as defined below.
url_file_extension_conditions Sequence[FrontdoorRuleConditionsUrlFileExtensionCondition]: A url_file_extension_condition block as defined below.
url_filename_conditions Sequence[FrontdoorRuleConditionsUrlFilenameCondition]: A url_filename_condition block as defined below.
url_path_conditions Sequence[FrontdoorRuleConditionsUrlPathCondition]: A url_path_condition block as defined below.

clientPortConditions List<Property Map>: A client_port_condition block as defined below.
cookiesConditions List<Property Map>: A cookies_condition block as defined below.
hostNameConditions List<Property Map>: A host_name_condition block as defined below.
httpVersionConditions List<Property Map>: A http_version_condition block as defined below.
isDeviceConditions List<Property Map>: A is_device_condition block as defined below.
postArgsConditions List<Property Map>: A post_args_condition block as defined below.
queryStringConditions List<Property Map>: A query_string_condition block as defined below.
remoteAddressConditions List<Property Map>: A remote_address_condition block as defined below.
requestBodyConditions List<Property Map>: A request_body_condition block as defined below.
requestHeaderConditions List<Property Map>: A request_header_condition block as defined below.
requestMethodConditions List<Property Map>: A request_method_condition block as defined below.
requestSchemeConditions List<Property Map>: A request_scheme_condition block as defined below.
requestUriConditions List<Property Map>: A request_uri_condition block as defined below.
serverPortConditions List<Property Map>: A server_port_condition block as defined below.
socketAddressConditions List<Property Map>: A socket_address_condition block as defined below.
sslProtocolConditions List<Property Map>: A ssl_protocol_condition block as defined below.
urlFileExtensionConditions List<Property Map>: A url_file_extension_condition block as defined below.
urlFilenameConditions List<Property Map>: A url_filename_condition block as defined below.
urlPathConditions List<Property Map>: A url_path_condition block as defined below.

FrontdoorRuleConditionsClientPortCondition
, FrontdoorRuleConditionsClientPortConditionArgs

Operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
MatchValues List<string>: One or more integer values(e.g. "1") representing the value of the client port to match. If multiple values are specified, they're evaluated using OR logic.
NegateCondition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.

Operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
MatchValues []string: One or more integer values(e.g. "1") representing the value of the client port to match. If multiple values are specified, they're evaluated using OR logic.
NegateCondition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.

operator String: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
matchValues List<String>: One or more integer values(e.g. "1") representing the value of the client port to match. If multiple values are specified, they're evaluated using OR logic.
negateCondition Boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.

operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
matchValues string[]: One or more integer values(e.g. "1") representing the value of the client port to match. If multiple values are specified, they're evaluated using OR logic.
negateCondition boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.

operator str: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
match_values Sequence[str]: One or more integer values(e.g. "1") representing the value of the client port to match. If multiple values are specified, they're evaluated using OR logic.
negate_condition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.

operator String: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
matchValues List<String>: One or more integer values(e.g. "1") representing the value of the client port to match. If multiple values are specified, they're evaluated using OR logic.
negateCondition Boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.

FrontdoorRuleConditionsCookiesCondition
, FrontdoorRuleConditionsCookiesConditionArgs

CookieName string: A string value representing the name of the cookie.
Operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
MatchValues List<string>: One or more string or integer values(e.g. "1") representing the value of the request header to match. If multiple values are specified, they're evaluated using OR logic.
NegateCondition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
Transforms List<string>: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

CookieName string: A string value representing the name of the cookie.
Operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
MatchValues []string: One or more string or integer values(e.g. "1") representing the value of the request header to match. If multiple values are specified, they're evaluated using OR logic.
NegateCondition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
Transforms []string: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

cookieName String: A string value representing the name of the cookie.
operator String: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
matchValues List<String>: One or more string or integer values(e.g. "1") representing the value of the request header to match. If multiple values are specified, they're evaluated using OR logic.
negateCondition Boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms List<String>: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

cookieName string: A string value representing the name of the cookie.
operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
matchValues string[]: One or more string or integer values(e.g. "1") representing the value of the request header to match. If multiple values are specified, they're evaluated using OR logic.
negateCondition boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms string[]: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

cookie_name str: A string value representing the name of the cookie.
operator str: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
match_values Sequence[str]: One or more string or integer values(e.g. "1") representing the value of the request header to match. If multiple values are specified, they're evaluated using OR logic.
negate_condition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms Sequence[str]: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

cookieName String: A string value representing the name of the cookie.
operator String: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
matchValues List<String>: One or more string or integer values(e.g. "1") representing the value of the request header to match. If multiple values are specified, they're evaluated using OR logic.
negateCondition Boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms List<String>: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

FrontdoorRuleConditionsHostNameCondition
, FrontdoorRuleConditionsHostNameConditionArgs

Operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
MatchValues List<string>: A list of one or more string values representing the value of the request hostname to match. If multiple values are specified, they're evaluated using OR logic.
NegateCondition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
Transforms List<string>: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

Operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
MatchValues []string: A list of one or more string values representing the value of the request hostname to match. If multiple values are specified, they're evaluated using OR logic.
NegateCondition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
Transforms []string: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

operator String: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
matchValues List<String>: A list of one or more string values representing the value of the request hostname to match. If multiple values are specified, they're evaluated using OR logic.
negateCondition Boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms List<String>: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
matchValues string[]: A list of one or more string values representing the value of the request hostname to match. If multiple values are specified, they're evaluated using OR logic.
negateCondition boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms string[]: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

operator str: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
match_values Sequence[str]: A list of one or more string values representing the value of the request hostname to match. If multiple values are specified, they're evaluated using OR logic.
negate_condition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms Sequence[str]: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

operator String: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
matchValues List<String>: A list of one or more string values representing the value of the request hostname to match. If multiple values are specified, they're evaluated using OR logic.
negateCondition Boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms List<String>: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

FrontdoorRuleConditionsHttpVersionCondition
, FrontdoorRuleConditionsHttpVersionConditionArgs

MatchValues List<string>: What HTTP version should this condition match? Possible values 2.0, 1.1, 1.0 or 0.9.
NegateCondition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
Operator string: Possible value Equal. Defaults to Equal.

MatchValues []string: What HTTP version should this condition match? Possible values 2.0, 1.1, 1.0 or 0.9.
NegateCondition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
Operator string: Possible value Equal. Defaults to Equal.

matchValues List<String>: What HTTP version should this condition match? Possible values 2.0, 1.1, 1.0 or 0.9.
negateCondition Boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
operator String: Possible value Equal. Defaults to Equal.

matchValues string[]: What HTTP version should this condition match? Possible values 2.0, 1.1, 1.0 or 0.9.
negateCondition boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
operator string: Possible value Equal. Defaults to Equal.

match_values Sequence[str]: What HTTP version should this condition match? Possible values 2.0, 1.1, 1.0 or 0.9.
negate_condition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
operator str: Possible value Equal. Defaults to Equal.

matchValues List<String>: What HTTP version should this condition match? Possible values 2.0, 1.1, 1.0 or 0.9.
negateCondition Boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
operator String: Possible value Equal. Defaults to Equal.

FrontdoorRuleConditionsIsDeviceCondition
, FrontdoorRuleConditionsIsDeviceConditionArgs

MatchValues string: Which device should this rule match on? Possible values Mobile or Desktop.
NegateCondition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
Operator string: Possible value Equal. Defaults to Equal.

MatchValues string: Which device should this rule match on? Possible values Mobile or Desktop.
NegateCondition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
Operator string: Possible value Equal. Defaults to Equal.

matchValues String: Which device should this rule match on? Possible values Mobile or Desktop.
negateCondition Boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
operator String: Possible value Equal. Defaults to Equal.

matchValues string: Which device should this rule match on? Possible values Mobile or Desktop.
negateCondition boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
operator string: Possible value Equal. Defaults to Equal.

match_values str: Which device should this rule match on? Possible values Mobile or Desktop.
negate_condition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
operator str: Possible value Equal. Defaults to Equal.

matchValues String: Which device should this rule match on? Possible values Mobile or Desktop.
negateCondition Boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
operator String: Possible value Equal. Defaults to Equal.

FrontdoorRuleConditionsPostArgsCondition
, FrontdoorRuleConditionsPostArgsConditionArgs

Operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
PostArgsName string: A string value representing the name of the POST argument.
MatchValues List<string>: One or more string or integer values(e.g. "1") representing the value of the POST argument to match. If multiple values are specified, they're evaluated using OR logic.
NegateCondition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
Transforms List<string>: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

Operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
PostArgsName string: A string value representing the name of the POST argument.
MatchValues []string: One or more string or integer values(e.g. "1") representing the value of the POST argument to match. If multiple values are specified, they're evaluated using OR logic.
NegateCondition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
Transforms []string: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

operator String: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
postArgsName String: A string value representing the name of the POST argument.
matchValues List<String>: One or more string or integer values(e.g. "1") representing the value of the POST argument to match. If multiple values are specified, they're evaluated using OR logic.
negateCondition Boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms List<String>: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
postArgsName string: A string value representing the name of the POST argument.
matchValues string[]: One or more string or integer values(e.g. "1") representing the value of the POST argument to match. If multiple values are specified, they're evaluated using OR logic.
negateCondition boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms string[]: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

operator str: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
post_args_name str: A string value representing the name of the POST argument.
match_values Sequence[str]: One or more string or integer values(e.g. "1") representing the value of the POST argument to match. If multiple values are specified, they're evaluated using OR logic.
negate_condition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms Sequence[str]: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

operator String: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
postArgsName String: A string value representing the name of the POST argument.
matchValues List<String>: One or more string or integer values(e.g. "1") representing the value of the POST argument to match. If multiple values are specified, they're evaluated using OR logic.
negateCondition Boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms List<String>: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

FrontdoorRuleConditionsQueryStringCondition
, FrontdoorRuleConditionsQueryStringConditionArgs

Operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
MatchValues List<string>: One or more string or integer values(e.g. "1") representing the value of the query string to match. If multiple values are specified, they're evaluated using OR logic.
NegateCondition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
Transforms List<string>: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

Operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
MatchValues []string: One or more string or integer values(e.g. "1") representing the value of the query string to match. If multiple values are specified, they're evaluated using OR logic.
NegateCondition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
Transforms []string: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

operator String: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
matchValues List<String>: One or more string or integer values(e.g. "1") representing the value of the query string to match. If multiple values are specified, they're evaluated using OR logic.
negateCondition Boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms List<String>: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
matchValues string[]: One or more string or integer values(e.g. "1") representing the value of the query string to match. If multiple values are specified, they're evaluated using OR logic.
negateCondition boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms string[]: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

operator str: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
match_values Sequence[str]: One or more string or integer values(e.g. "1") representing the value of the query string to match. If multiple values are specified, they're evaluated using OR logic.
negate_condition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms Sequence[str]: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

operator String: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
matchValues List<String>: One or more string or integer values(e.g. "1") representing the value of the query string to match. If multiple values are specified, they're evaluated using OR logic.
negateCondition Boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms List<String>: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

FrontdoorRuleConditionsRemoteAddressCondition
, FrontdoorRuleConditionsRemoteAddressConditionArgs

MatchValues List<string>

For the IP Match or IP Not Match operators: specify one or more IP address ranges. If multiple IP address ranges are specified, they're evaluated using OR logic. For the Geo Match or Geo Not Match operators: specify one or more locations using their country code.

->NOTE: See the Specifying IP Address Ranges section below on how to correctly define the match_values field.

If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.

Operator string

The type of the remote address to match. Possible values include Any, GeoMatch or IPMatch. Use the negate_condition to specify Not GeoMatch or Not IPMatch. Defaults to IPMatch.

MatchValues []string

->NOTE: See the Specifying IP Address Ranges section below on how to correctly define the match_values field.

If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.

Operator string

The type of the remote address to match. Possible values include Any, GeoMatch or IPMatch. Use the negate_condition to specify Not GeoMatch or Not IPMatch. Defaults to IPMatch.

matchValues List<String>

->NOTE: See the Specifying IP Address Ranges section below on how to correctly define the match_values field.

negateCondition Boolean

If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.

operator String

The type of the remote address to match. Possible values include Any, GeoMatch or IPMatch. Use the negate_condition to specify Not GeoMatch or Not IPMatch. Defaults to IPMatch.

matchValues string[]

->NOTE: See the Specifying IP Address Ranges section below on how to correctly define the match_values field.

negateCondition boolean

If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.

operator string

The type of the remote address to match. Possible values include Any, GeoMatch or IPMatch. Use the negate_condition to specify Not GeoMatch or Not IPMatch. Defaults to IPMatch.

match_values Sequence[str]

->NOTE: See the Specifying IP Address Ranges section below on how to correctly define the match_values field.

negate_condition bool

If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.

operator str

The type of the remote address to match. Possible values include Any, GeoMatch or IPMatch. Use the negate_condition to specify Not GeoMatch or Not IPMatch. Defaults to IPMatch.

matchValues List<String>

->NOTE: See the Specifying IP Address Ranges section below on how to correctly define the match_values field.

negateCondition Boolean

If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.

operator String

The type of the remote address to match. Possible values include Any, GeoMatch or IPMatch. Use the negate_condition to specify Not GeoMatch or Not IPMatch. Defaults to IPMatch.

FrontdoorRuleConditionsRequestBodyCondition
, FrontdoorRuleConditionsRequestBodyConditionArgs

MatchValues List<string>: A list of one or more string or integer values(e.g. "1") representing the value of the request body text to match. If multiple values are specified, they're evaluated using OR logic.
Operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
NegateCondition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
Transforms List<string>: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

MatchValues []string: A list of one or more string or integer values(e.g. "1") representing the value of the request body text to match. If multiple values are specified, they're evaluated using OR logic.
Operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
NegateCondition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
Transforms []string: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

matchValues List<String>: A list of one or more string or integer values(e.g. "1") representing the value of the request body text to match. If multiple values are specified, they're evaluated using OR logic.
operator String: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
negateCondition Boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms List<String>: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

matchValues string[]: A list of one or more string or integer values(e.g. "1") representing the value of the request body text to match. If multiple values are specified, they're evaluated using OR logic.
operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
negateCondition boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms string[]: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

match_values Sequence[str]: A list of one or more string or integer values(e.g. "1") representing the value of the request body text to match. If multiple values are specified, they're evaluated using OR logic.
operator str: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
negate_condition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms Sequence[str]: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

matchValues List<String>: A list of one or more string or integer values(e.g. "1") representing the value of the request body text to match. If multiple values are specified, they're evaluated using OR logic.
operator String: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
negateCondition Boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms List<String>: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

FrontdoorRuleConditionsRequestHeaderCondition
, FrontdoorRuleConditionsRequestHeaderConditionArgs

HeaderName string: A string value representing the name of the POST argument.
Operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
MatchValues List<string>: One or more string or integer values(e.g. "1") representing the value of the request header to match. If multiple values are specified, they're evaluated using OR logic.
NegateCondition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
Transforms List<string>: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

HeaderName string: A string value representing the name of the POST argument.
Operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
MatchValues []string: One or more string or integer values(e.g. "1") representing the value of the request header to match. If multiple values are specified, they're evaluated using OR logic.
NegateCondition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
Transforms []string: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

headerName String: A string value representing the name of the POST argument.
operator String: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
matchValues List<String>: One or more string or integer values(e.g. "1") representing the value of the request header to match. If multiple values are specified, they're evaluated using OR logic.
negateCondition Boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms List<String>: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

headerName string: A string value representing the name of the POST argument.
operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
matchValues string[]: One or more string or integer values(e.g. "1") representing the value of the request header to match. If multiple values are specified, they're evaluated using OR logic.
negateCondition boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms string[]: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

header_name str: A string value representing the name of the POST argument.
operator str: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
match_values Sequence[str]: One or more string or integer values(e.g. "1") representing the value of the request header to match. If multiple values are specified, they're evaluated using OR logic.
negate_condition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms Sequence[str]: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

headerName String: A string value representing the name of the POST argument.
operator String: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
matchValues List<String>: One or more string or integer values(e.g. "1") representing the value of the request header to match. If multiple values are specified, they're evaluated using OR logic.
negateCondition Boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms List<String>: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

FrontdoorRuleConditionsRequestMethodCondition
, FrontdoorRuleConditionsRequestMethodConditionArgs

MatchValues List<string>: A list of one or more HTTP methods. Possible values include GET, POST, PUT, DELETE, HEAD, OPTIONS or TRACE. If multiple values are specified, they're evaluated using OR logic.
NegateCondition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
Operator string: Possible value Equal. Defaults to Equal.

MatchValues []string: A list of one or more HTTP methods. Possible values include GET, POST, PUT, DELETE, HEAD, OPTIONS or TRACE. If multiple values are specified, they're evaluated using OR logic.
NegateCondition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
Operator string: Possible value Equal. Defaults to Equal.

matchValues List<String>: A list of one or more HTTP methods. Possible values include GET, POST, PUT, DELETE, HEAD, OPTIONS or TRACE. If multiple values are specified, they're evaluated using OR logic.
negateCondition Boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
operator String: Possible value Equal. Defaults to Equal.

matchValues string[]: A list of one or more HTTP methods. Possible values include GET, POST, PUT, DELETE, HEAD, OPTIONS or TRACE. If multiple values are specified, they're evaluated using OR logic.
negateCondition boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
operator string: Possible value Equal. Defaults to Equal.

match_values Sequence[str]: A list of one or more HTTP methods. Possible values include GET, POST, PUT, DELETE, HEAD, OPTIONS or TRACE. If multiple values are specified, they're evaluated using OR logic.
negate_condition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
operator str: Possible value Equal. Defaults to Equal.

matchValues List<String>: A list of one or more HTTP methods. Possible values include GET, POST, PUT, DELETE, HEAD, OPTIONS or TRACE. If multiple values are specified, they're evaluated using OR logic.
negateCondition Boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
operator String: Possible value Equal. Defaults to Equal.

FrontdoorRuleConditionsRequestSchemeCondition
, FrontdoorRuleConditionsRequestSchemeConditionArgs

MatchValues string: The requests protocol to match. Possible values include HTTP or HTTPS.
NegateCondition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
Operator string: Possible value Equal. Defaults to Equal.

MatchValues string: The requests protocol to match. Possible values include HTTP or HTTPS.
NegateCondition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
Operator string: Possible value Equal. Defaults to Equal.

matchValues String: The requests protocol to match. Possible values include HTTP or HTTPS.
negateCondition Boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
operator String: Possible value Equal. Defaults to Equal.

matchValues string: The requests protocol to match. Possible values include HTTP or HTTPS.
negateCondition boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
operator string: Possible value Equal. Defaults to Equal.

match_values str: The requests protocol to match. Possible values include HTTP or HTTPS.
negate_condition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
operator str: Possible value Equal. Defaults to Equal.

matchValues String: The requests protocol to match. Possible values include HTTP or HTTPS.
negateCondition Boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
operator String: Possible value Equal. Defaults to Equal.

FrontdoorRuleConditionsRequestUriCondition
, FrontdoorRuleConditionsRequestUriConditionArgs

Operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
MatchValues List<string>: One or more string or integer values(e.g. "1") representing the value of the request URL to match. If multiple values are specified, they're evaluated using OR logic.
NegateCondition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
Transforms List<string>: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

Operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
MatchValues []string: One or more string or integer values(e.g. "1") representing the value of the request URL to match. If multiple values are specified, they're evaluated using OR logic.
NegateCondition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
Transforms []string: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

operator String: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
matchValues List<String>: One or more string or integer values(e.g. "1") representing the value of the request URL to match. If multiple values are specified, they're evaluated using OR logic.
negateCondition Boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms List<String>: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
matchValues string[]: One or more string or integer values(e.g. "1") representing the value of the request URL to match. If multiple values are specified, they're evaluated using OR logic.
negateCondition boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms string[]: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

operator str: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
match_values Sequence[str]: One or more string or integer values(e.g. "1") representing the value of the request URL to match. If multiple values are specified, they're evaluated using OR logic.
negate_condition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms Sequence[str]: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

operator String: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
matchValues List<String>: One or more string or integer values(e.g. "1") representing the value of the request URL to match. If multiple values are specified, they're evaluated using OR logic.
negateCondition Boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.
transforms List<String>: A Conditional operator. Possible values include Lowercase, RemoveNulls, Trim, Uppercase, UrlDecode or UrlEncode. Details can be found in the Condition Transform List below.

FrontdoorRuleConditionsServerPortCondition
, FrontdoorRuleConditionsServerPortConditionArgs

MatchValues List<string>: A list of one or more integer values(e.g. "1") representing the value of the client port to match. Possible values include 80 or 443. If multiple values are specified, they're evaluated using OR logic.
Operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
NegateCondition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.

MatchValues []string: A list of one or more integer values(e.g. "1") representing the value of the client port to match. Possible values include 80 or 443. If multiple values are specified, they're evaluated using OR logic.
Operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
NegateCondition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.

matchValues List<String>: A list of one or more integer values(e.g. "1") representing the value of the client port to match. Possible values include 80 or 443. If multiple values are specified, they're evaluated using OR logic.
operator String: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
negateCondition Boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.

matchValues string[]: A list of one or more integer values(e.g. "1") representing the value of the client port to match. Possible values include 80 or 443. If multiple values are specified, they're evaluated using OR logic.
operator string: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
negateCondition boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.

match_values Sequence[str]: A list of one or more integer values(e.g. "1") representing the value of the client port to match. Possible values include 80 or 443. If multiple values are specified, they're evaluated using OR logic.
operator str: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
negate_condition bool: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.

matchValues List<String>: A list of one or more integer values(e.g. "1") representing the value of the client port to match. Possible values include 80 or 443. If multiple values are specified, they're evaluated using OR logic.
operator String: A Conditional operator. Possible values include Any, Equal, Contains, BeginsWith, EndsWith, LessThan, LessThanOrEqual, GreaterThan, GreaterThanOrEqual or RegEx. Details can be found in the Condition Operator List below.
negateCondition Boolean: If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.

FrontdoorRuleConditionsSocketAddressCondition
, FrontdoorRuleConditionsSocketAddressConditionArgs

MatchValues List<string>

Specify one or more IP address ranges. If multiple IP address ranges are specified, they're evaluated using OR logic.

->NOTE: See the Specifying IP Address Ranges section below on how to correctly define the match_values field.

If true operator becomes the opposite of its value. Possible values true or false. Defaults to false. Details can be found in the Condition Operator List below.

Operator string

The type of match. The Possible values are IpMatch or Any. Defaults to IPMatch.

->NOTE: If the value of the operator field is set to IpMatch then the match_values field is also required.

MatchValues []string

Specify one or more IP address ranges. If multiple IP address ranges are specified, they're evaluated using OR logic.

->NOTE: See the Specifying IP Address Ranges section below on how to correctly define the match_values field.